Thermoplastic materials in buildings
Approved document B, Fire Safety, Volume 1 Dwelling houses, defines a thermoplastic material as:
'Any synthetic polymeric material that has a softening point below 200°C if tested to BS EN ISO 306 Method A120. Specimens for this test may be fabricated from the original polymer where the thickness of material of the end product is less than 2.5mm.'
Acrylics are an example of thermoplastic materials. Acrylics are chemicals that contain the acryloyl group, derived from acrylic acid, such as polyacrylonitrile and poly(methyl methacrylate) (PMMA). They generally have good optical clarity, scratch resistance, dimensional stability and rigidity. They are do not deteriorate in sunlight and they have good adhesion, are thermoplastic, easy to form and cut into a variety of shapes. However, they are combustible, are not flexible, suffer from stress cracking and are not resistant to solvents.
Acrylics have a very wide range of uses in the construction industry:
- Transparent or translucent sheeting such as acrylic glass (‘Plexiglass’ or ‘Perspex’).
- Opaque cladding and panel materials.
- Paints.
- Resins, sealants, adhesives and adhesive tapes
- Flashing materials.
- Concretes, mortars, renders and asphalt.
- Architectural fabrics.
- Baths, shower trays and sinks.
- Coatings for metals, concrete and masonry.
- Flooring and carpets.
- Worktops.
- Signage.
- Light fixtures.
- LCD screens.
- Furniture.
[edit] Related articles on Designing Buildings Wiki
- Acrylic.
- Adhesives.
- Composites.
- ETFE.
- Expanded polystyrene.
- Fabric structures.
- Glass reinforced plastic GRP.
- India looks at using plastic instead of sand.
- Nylon.
- Paint.
- Polycarbonate.
- Polyethylene.
- Polymers.
- Polypropylene.
- Polyvinyl chloride (PVC).
- Stretched-skin ceiling.
- Transparent insulation materials.
Featured articles and news
Gregor Harvie argues that AI is state-sanctioned theft of IP.
Using technology to empower communities
The Community data platform; capturing the DNA of a place and fostering participation, for better design.
Heat pump and wind turbine sound calculations for PDRs
MCS publish updated sound calculation standards for permitted development installations.
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.